WorldWide Drilling Resource

1979 CP650WS mtd. on a 1996 Kenworth T800. 500’ drill pipe, hammer oiler, 6” hammer bit, 6406-B Cat ® . Runs strong, pulled compressor has oil leak still builds air, DHH compressor 825/350, good solid clean rig. If interested, pictures are available........................... $85,000 OBO Call 541-479-2758 1330-887 82 DECEMBER 2018 WorldWide Drilling Resource WorldWide Drilling Resource ®® 1330-970 2011 AMS CRS17-C Compact , sonic drillhead, John Deere 4045 diesel, 173 hp, hyd. hoist, rod clamp, wireless remote, water pump, vibration: 20,000 lbs - 28,000 lbs, feed system: 12’ and 8' stroke, pullback force: 13,000 lbs, carrier has 4.6 psi ground pressure, 1545 hours........................... $199,500 909-600-7555 1330-597 1996 Driltech DK25 , on a 1997 Ford L8000, new hoses throughout, rebuilt 900/350 Sullair compressor, 2013 rebuilt Cat ® 3406E 2012, in use daily, 1000'+ depth capability, up to 12.5" wide, 6" hammer with 8" stabilizer, helper station, Belco hydraulic welder, comes with 400' of 4.5" rods........................... $140,000 Call Paul 828-837-2997 1330-815 Wichtex Model R-6 (Serial #81-1302) Double Drum Drawworks Rig The unit is powered by an 8V71 Detroit engine with 8000 series Spicer trans. with controls for 65’, 150,000 lbs. single hyd. raising derrick with shifting crown. Derrick reputed to have been reinforced to handle 200,000 lbs........... $325,000 Reduced............................... $295,000 Bottom$ ............................... $275,000 Call (662) 843-4076 or e-mail thompson@midsouthwater.com 1330-552 2017 Foremost DR24 in excellent condition and available immediately. Mtd. on a Kenworth T-800W with a Tier 4 Cummins ISX 525 hp with Jake, upgraded cooling package, 20,000 front, 46,000 rears. RC150 high-torque top drive, 24" lower drive, toolbox, aux. winch with jib, IR 900/350 compressor, light package, hammer oiler, and 18 gpm Bean pump. Diesel pro heater, upgraded to 3" airline, 10" discharge swivel with10¾cone seal, 1500’ sandline. Less than 1100 hours on rig unit. Tooling for 24" drilling available including bit, hammer, hammer sleeve, casing jaws, and shoes for additional price. Extended five (5) year warranty on engine through May of 2022. This rig is in like-new condition. Asking without tooling......... $825,000 With tooling included............ $855,000 All offers considered. Call Jerry at 717-649-0221 or 717-795-7878 or e-mail jerry@eichelbergers.com 1330-880 1973 Chicago Pneumatic 650WS , ser. #98563, 900/350 comp., on Paystar 5000 with Cummins 350....... $150,000 info@deschenesdrilling.com 1330-1241 2017 Nordic Drill DRC-10-A Dual rotary mtd. on crawlers, for drilling up to 10” casing, equipped with angle slide, 1910 hrs, 32,000 lbs................. $325,000 Call 819-758-6468 or e-mail: simon@puitbec.com For information: www.nordicdrill.com 1330-891 2015 Casagrande Continuous Flight AugerB175XP , kellybar extension, 2200 rpm - 194 kw engine, 769 working hours on rig, excellent condition..... $599,000 For Sale L.R.E. Ground Services, Inc. Richard Blanche (800) 580-0229 ext. 2150 richard.blanche@lregsi.com